HEIDENHAIN VT 121 Operating Instructions Manual page 47

6.6 Resuming operation
When operation is resumed, e.g. when the product is
reinstalled after repair or when it is remounted, the same
measures and personnel requirements apply as for
mounting and installing the product.
Further information: "Mounting", Page 38
Further information: "Installation", Page 40
The operating company must ensure safe resumption of
operation and assign authorized and appropriately qualified
personnel to the task.
Further information: "Obligations of the operating
company", Page 34
HEIDENHAIN | VT 121 | Operating Instructions | 03/2022
7 Removal and disposal
7.1 Overview
This chapter contains information and environmental
protection specifications that must be observed for correct
disassembly and disposal of the device.
7.2 Removal
The following steps must be performed only by
qualified personnel.
Further information: "Personnel qualification",
Page 34
Depending on the connected peripherals, the product may
need to be removed by an electrical specialist.
In addition, the same safety precautions that apply to the
mounting and installation of the respective components
must be taken.
Further information: "General safety precautions", Page 35
ff.
Removing the product
To remove the product, follow the installation and
mounting steps in the reverse order.
Further information: "Mounting", Page 38
Further information: "Installation", Page 40
47