HEIDENHAIN VT 121 Operating Instructions Manual page 38

Place all accessories that were included in the shipment
in the original packaging
Further information: "Items supplied and accessories",
Page 36
Enclose all the documentation that was included in the
original packaging
Further information: "Storage and distribution of the
documentation", Page 31
If the product is returned for repair to the
Service department:
Ship the product without accessories
3.5.2 Storage of the product
Package the product as described above
Observe the specified ambient conditions
Further information: "Specifications", Page 48
Inspect the product for damage after any transport or
longer storage times
38
4 Mounting
4.1 Overview
This chapter describes the mounting of the product. It
contains information about how to correctly mount the
product by means of two fixing clamps.
The following steps must be performed only by
qualified personnel.
Further information: "Personnel qualification",
Page 34
4.2 Mounting the product
WARNING
Crushing and impact hazards due to moving parts
When mounting work is performed inside a machine's
working space, moving parts may lead to crushing or
impact.
Switch off the machine before mounting the product
Secure all movable parts
Wear protective gear
HEIDENHAIN | VT 121 | Operating Instructions | 03/2022