Table of Contents
Advertisement
6.9.4. V-LINEARITY CONFIRMATION / ADJUSTMENT
1. Confirm V-linear as to the balance of the circle. / If needed, adjust
V-linear (VGA 400).
6.9.5. SIDE EW CONFIRMATION / ADJUSTMENT
1. Confirm the vertical line is straight line. / If needed, adjust the
vertical line to straight line by Parabola (VGA 400).
2. Confirm both sides vertical line in Fig. 1 are straight line. / If
needed, adjust the vertical line to straight line of both side vertical
line in Fig. 11 by Trapezoid (VGA 400).
3. Set H-SIZE in the user control to NORMAL. / (No need, if SELF
CHECK is done before shipping).
6.10. TABLE 1
Advertisement
Table of Contents
