Related Manuals for Vanco EVOLUTION EVSP8K22
Summary of Contents for Vanco EVOLUTION EVSP8K22
- Page 1 HDMI® 2x2 Switching Splitter Vanco Part Number: EVSP8K22 8K HDMI® 2x2 Switching Splitter www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
-
Page 3: Package Contents
INTRODUCTION The Evolution by Vanco EVSP8K22 HDMI Splitter with 8K HDR pass-through, splits one source at a time to two displays. With two HDMI inputs, two 8K sources can be switched and split at the same time. Supports video resolutions up to 8K@60Hz and 4K@120Hz over 4 channels of 10Gbps FRL for 40Gbps bandwidth. -
Page 4: Specifications
SPECIFICATIONS HDMI Compliance ............HDMI 2.1 HDCP Compliance ............. HDCP 2.3 (backwards compatible) Video Bandwidth……………………………....40Gbps Video Resolutions (MAX) ..........Up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit Color Depth ............... 8/10/12-bit Color Space .............. RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0 Audio Formats ............ -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. IR WINDOW: Receives IR commands from included IR remote (ensure this is visible when trying to control with the IR remote) 2. POWER LED: Emits GREEN when unit is powered on; Emits RED when unit is in standby mode 3. - Page 6 IR REMOTE Power on the product or set it to standby mode Press the 1 or 2 button to select which input will be viewed from the outputs Press this button to toggle between IN 1 and IN 2 www.vanco1.com...
-
Page 7: Connection Diagram
CONNECTION DIAGRAM HDTV HDTV Computer Gaming System CONNECT AND OPERATE Connect sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. on the unit with HDMI cable(s). Insert and extract cables carefully with the power switched off. Connecting and disconnecting while the unit is powered can result in damage to circuitry. - Page 8 EDID EDID can be managed by using the dip switches on the units in different configurations. See the chart below for how each configuration can be used to get the desired signal output that is needed and wanted. NOTE: Make sure the power is removed whenever you are changing EDID settings. www.vanco1.com...
- Page 9 SAFETY AND NOTICE The EVSP8K22 has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the EVSP8K22 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
-
Page 10: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. -
Page 11: Liability Statement
LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the EVOLUTION EVSP8K22 and is the answer not in the manual?
Questions and answers