Related Manuals for Vanco HDSP4K12
Summary of Contents for Vanco HDSP4K12
- Page 1 4K HDMI® Splitters with HDR Vanco Part Number: HDSP4K12 1x2 HDSP4K14 1x4 Technical Support www.vanco1.com • techsupport@vanco1.com • 800-626-6445...
-
Page 2: Dear Customer
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. -
Page 3: Package Contents
• High bandwidth: 18 Gbps • Features status indicator for connection & input HDCP compliance • Can be cascaded with other Evolution by Vanco products to create additional output options or to create an expanded distribution system • Power Supply: DC 5V, 1A •... - Page 4 • High bandwidth: 18 Gbps • Features status indicator for connection & input HDCP compliance • Can be cascaded with other Evolution by Vanco products to create additional output options or to create an expanded distribution system • Power Supply: DC 5V, 1A •...
-
Page 5: Specifications
SPECIFICATIONS Video Bandwidth............600MHz/18Gbps Input Ports..............1 × HDMI (Female type) Output Ports.............. 2 or 4 × HDMI (Female type), Output Resolution............480i-1080p@50/60Hz; 2160p@24/30Hz; 2160p@60Hz; VESA Formats up to QSXGA 2560x2048@60Hz ESD Protection............Human Body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge) Power Supply............. -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS HDSP4K12 Front Back Right Side 1. POWER LED: Illuminates when the splitter is connected to power 2. IN LED: Illuminates when the source is connected and is powered on 3. OUTPUT 1/2 LED: Illuminates when a display is connected to “HDMI OUT 1/2” and is powered on 4. - Page 7 PANEL DESCRIPTIONS HDSP4K14 Front Back Right Side 1. POWER LED: Illuminates when the splitter is connected to power 2. IN LED: Illuminates when the source is connected and is powered on 3. OUTPUT 1/2/3/4 LED: Illuminates when a display is connected to “HDMI OUT 1/2/3/4” and is powered on 4.
-
Page 8: Edid Management
EDID MANAGEMENT Extended Display Identification Data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source (e.g. graphics card or set-top box). In a nutshell, the display provides its EDID info to the source to send the proper signal format, this is essential for a proper handshake to occur. •... -
Page 9: Connect And Operate
CONNECT AND OPERATE HDSP4K12 HDSP4K14 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the unit. 2. Connect a display such as an HDTV or HD Projector to the HDMI output on the unit. -
Page 10: Troubleshooting
SAFETY AND NOTICE The HDSP4K12/HDSP4K14 has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the HDSP4K12/HDSP4K14 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...