Netcommand Remote Control Buttons: Device Menu, Guide; Netcommand Remote Control Buttons Device Menu, Guide - Mitsubishi WS-48613 Owner's Manual

NetCommand Remote Control Buttons: Device Menu, Guide

Device Menu
Pressing DEVICE MENU displays the Transport playback
devices. A second press of this button will display the
menus for NetCommand compatible devices. Menu
access varies by device.
While watching a NetCommand compatible traditional IR
controlled or an IEEE 1394 device, press DEVICE MENU
once or twice to display the menu for that device.
For models WS-55813, WS-65713, WS-65813 and WS-
73813 when the Device Selection menu is displayed,
and a HAVi IEEE 1394 device is highlighted, pressing
the DEVICE MENU button will automatically display the
menu for that device over the current source. The HAVi
IEEE 1394 device does not need to be the current source.
Some devices do not display menus. Check the Owner's
Guide of the IEEE 1394 device if you are unable to see a
menu.
When the menu for the device has been displayed, to
navigate, press ADJUST , ,
some NetCommand traditional devices you will also be
able to use the number buttons and other additional
buttons on the TV remote.
For traditional DVD players, the Device Menu is also
known as the setup menu.
For Memory cards with JPEG, MP3 or WMA7 files,
pressing DEVICE MENU displays the MEDIA SETUP menu
or redisplays the dialog box if the screen is blank.
or and ENT(er). For
Guide
GUIDE displays the on-screen programming guides.
• For NetCommand compatible satellite receivers and some
cable boxes, GUIDE will display the on-screen programming
guide for the receiver or cable box. Press ADJUST , ,
or and ENT(er) to navigate the displayed Guide. For
NetCommand compatible satellite receivers, you may also be
able to use the number or other additional buttons.
• For NetCommand compatible DVD players, GUIDE will
display the DVD disc menu (not the setup menu).
• For Antenna DTV and IEEE 1394 devices, pressing GUIDE will
display the Digital Channel Guide showing the sub-channels,
or bitstreams for the current channel or device. For Antenna
DTV only the sub-channels for the current channel are seen
first. Press ADJUST or
memory.
• For IEEE 1394 devices with digital connections, the first press
of GUIDE will display the TV's digital channel guide. The
second press will display the program guide for the tuned
device, such as a cable box or DBS.
• For compatible traditional VCRs, pressing GUIDE when the
VCR is highlighted on the Device Selection menu, will change
the VCR's input.
• For A/V Discs, pressing GUIDE will display the Track List
screen.
• While the Device Selection menu is displayed with the control
in the Audio Section and the A/V Receiver icon is highlighted
then a press of GUIDE switches the A/V Receiver from
analog audio to digital audio, and vice versa.
• For Memory cards, GUIDE displays the Thumbnail or Playlist
menu.
to see all the channels in
75