Adding Devices - Mitsubishi WS-48613 Owner's Manual

Edit NetCommand
Mitsubishi's NetCommand offers the ability to edit your home theater configuration so that you can add new devices,
change device settings and connection inputs, delete devices and even learn the remote control IR signals of devices
that are not already in the NetCommand memory.
Edit NetCommand Option at the Setup
Menu
Figure 13
The five setting on the Setup Menu: Add, Change, Delete,
Review and Initial are used to change the NetCommand
setup to reflect a change in your home theater system. To
learn the remote control IR signals of a device that is not
already in the NetCommand memory, add this device as
manufacturer of "Other". The learning screens will then
automatically be included in the series of screens used for
adding the device.
Figure 13. Setup Menu Edit NetCommand Option
Add:
Add a new device to the NetCommand setup.
Change:
Change the brand/model or input connections of a device
already listed in the configuration. Learn the remote
control signals of devices listed as "Other" brands.
Delete:
Remove a device or erase the complete NetCommand
home theater configuration. The learned remote control
signals are erased when the associated device is deleted.
Review:
View a list of all devices and input connections in the
NetCommand home theater configuration. This is also
where you can turn on or off unused TV inputs or devices.
Initial:
Start the setup at the beginning. This button only
becomes available after deleting the complete
configuration, or if NetCommand was not set up when the
TV was first powered On.
40

, Adding Devices

®
NOTE: Select Next>, then press ENT(er) at
each screen, to move forward to the next screen.
Add
Figure 14
Select "Add" from the Edit NetCommand screen, and
the New Device screen will display. Select the Device
type that you would like to add. You may add your
A/V Receiver (if not added in Initial setup) Cable Box,
Camcorder, DBS, DVD, Laser Disc, PC and VCR.
At the next screen, choose the manufacturer. If you
choose "Other" for the manufacturer, the device (A/V
Receiver, Cable, DBS, DVD or VCR) can be learned. For
device types Laser, Cam(corder), and PC, the "Learn"
screen is skipped. There is no NetCommand support and
no learning.
At the next screen, you can keep the default Name or
select a custom Name for the device, using ADJUST
to select letters A-Z, numbers 0-9, and/or symbols (!.&'/
:*- and blank) for each character of the name you would
like for the selected channel.
The next screen displays the Connection screen
(RF Connection for Cable Box). Select the TV and
A/V Receiver inputs that the device is connected
to. Connecting only audio to the A/V Receiver is
recommended. The A/V Receiver may need configuring
for digital audio.
Figure 14. Add screen
or