Mitsubishi Electric WD-60737 Owner's Manual page 36

36
4. TV Menus
Adjust, continued
To make audio adjustments:
From the
•
1. Press
Audio
2. Press
• While watching TV:
(AUDIO) in the on-screen menu. Press
the audio option you want to change. Press
change settings.
Speakers The Speakers option displays only if an A/V receiver or headphone connection has been
detected. Detection occurs on the right AVR AUDIO OUTPUT jack and the DIGITAL AUDIO OUT
jack. An A/V receiver can also be detected on an HDMI jack.
TV
AV Receiver
Headphones
Bass
Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Balance Controls audio balance between the right and left TV speakers
Sound Mode Stereo
Surround
Listen To Stereo
Applicable only
Mono
to analog chan-
nels from the
ANT input SAP
(Second
Audio
Program)
Language Selects the current language for a digital program from the ANT input. Each digital program may
include from zero to seven language choices.
Available only for digital channels from the ANT input.
Level Sound On, Off
Adjust > Audio menu:
to highlight an option
to adjust.
Press the MORE key and then 9
Turns on the internal TV speakers.
Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an analog A/V receiver, be sure to change the
Speakers setting to TV to hear sound from the TV speakers.
Turns off the TV speakers so you hear sound only from connected headphones.
See "7. AVR AUDIO OUTPUT," page 16. This option is not available if DIGITAL
AUDIO OUTPUT is connected.
No special audio effects from the TV speakers
Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The
word Stereo is displayed when you tune to a channel broadcasting in stereo.
Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono with this setting.
Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
Reduces differences in sound volume between programming segments, such as
the difference between regular broadcast programs and commercial segments.
to select
to