Notes on Scan and channel memorization
• Channel memorization may take up to 15 minutes
• To stop channel memorization before completion,
press CANCEL. Channels already added are retained.
• When watching TV, press CH
• To add a digital channel that does not appear in the
Edit menu without repeating channel memorization:
Look up the
physical channel number for
the new digital channel. See the website
www.antennaweb.org for help.
ACTIVITY and select the ANT input.
Adding/Deleting Channels Using the Channel Edit Menu
Channels marked with a check are in memory.
To add or delete a channel from
To add a single digital channel not in the list, see the notes under
Digital channels are listed by virtual channel number with the physical channel number shown in small gray text.
See below for an explanation of these terms.
Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the
virtual number is associated with the corresponding analog channel number. For example, a broadcaster may
associate digital channel 2-1 with their analog channel 2.
Physical Digital Channel Number.
shown on screen in gray text.
You must perform a channel scan to receive digital channels. Scan searches for broad-
cast channels and adds them to TV memory. To start channel scan:
Highlight one of the input selections based on your connection to the
when connected to an indoor or outdoor antenna.
when connected to direct cable (no cable box)
to highlight SCAN.
ENTER to start channel memorization.
After channel scan, Edit lets you add and delete memorized channels.
• Press PAGE DN/UP to jump to the next or previous page of channel numbers.
to move through all channel numbers, one at a time.
to move through
memory, highlight the channel number and press ENTER.
The channel number officially assigned to the actual broadcast frequency;
Standard is for most viewing conditions. Use Bright in brightly lit rooms.
You may notice increased fan noise when using the Bright setting.
4. TV Menus
Use the number keys and
the physical channel number followed by "-1"
and ENTER. For example, for physical channel
The TV will search for a digital channel on the channel
36 frequency. When it finds the channel, it will:
a. Add the channel to memory.
b. Change the channel number to the virtual
channel number sent by the broadcaster.
c. Add to memory any associated sub-
Rememorize channels if you move the TV to a differ-
ent geographic area with a different channel line-up.
Scan on this page.
CANCEL key to enter