Tv Connections; Before You Begin; Hdtv Cable Box Or Satellite Receiver With Component Video - Mitsubishi Electric WD-57733 Owner's Manual

3

TV Connections

Before you Begin

Auto Input Sensing
The TV's Auto Input Sensing feature automatically rec-
ognizes most connections and prompts you to identify
the type of device connected. See chapter 2, "TV
Setup," for more on Auto Input Sensing.
Connection Types
Review the connection types available on your input
devices and use inputs that will give the best video
quality. For example, choose HDMI over component
video, and choose component video over S-video or
composite video.
Picture Quality
For best picture quality, route signals directly from
the input device to the TV; avoid routing video signals
through an A/V receiver, for example.

HDTV Cable Box or Satellite Receiver with Component Video

If your cable box or satellite receiver has an HDMI
output, use the connections for HDMI devices
described later in this chapter.
Required: RCA component video cables, left/right
analog stereo audio cables.
1. Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver. See your device's
owner's guide for instructions and cable compatibil-
ity.
2. Connect RCA-type cables from the Y PB PR outputs
on the HDTV cable box or satellite receiver to
COMPONENT on the TV back panel, matching the
colored green, blue, and red connections.
3. Connect left (white) and right (red) audio cables
from the HDTV cable box or satellite receiver to
COMPONENT AUDIO L (MONO) and R on the TV
back panel.
Note: To hear digital surround sound, connect the digital
audio output from your cable box or satellite re-
ceiver directly to your digital A/V receiver.
Sound Quality
For best audio quality, route audio signals from the
input device directly to your A/V receiver or sound
system whenever possible.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at many electronics
stores.
Figure 1. Connecting an external HDTV receiver with
ANT 2/ AUX
component video connections
DIGITAL
AUDIO
ANT 1 / MAIN
OUT
IR EMITTER
NetCommand R
Y Pb Pr Y Pb Pr (480i/480p/720p/1080i) (480i/480p/720p/1080i) AUDIO AUDIO
Pr Pr L L MONO) MONO) R R
Y Y Pb Pb ( (
PC/DVI
AUDIO
INPUT
AVR
AUDIO
OUTPUT
INPUT 1
INPUT 2
S-VIDEO VIDEO L (MONO) - AUDIO - R
HDMI
1 2 3
VIDEO: 480i /480p /720p /1080i /1080p
AUDIO: PCM STEREO
PC: VGA / W-VGA / SVGA / W-SVGA /
XGA / W-XGA / SXGA / 720p /1080p
17