Table of Contents
Advertisement
3. Setup
AC Power
The COREpar Q120 ILS has an auto-ranging power supply, and it can work with an input voltage range of
100 to 240 VAC, 50/60 Hz. To determine the product's power requirements (circuit breaker, power outlet,
and wiring), use the current value listed on the label affixed to the product's back panel, or refer to the
product's specifications chart. The listed current rating indicates the product's average current draw under
normal conditions.
•
Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the
exact same type and rating.
Re-insert the fuse holder and reconnect power.
Power Linking
The product provides power linking via the Edison outlet located in the back of the product. Please see the
diagram below for further explanation.
Power-Linking Diagram
st
1
product
You can power link up to 6 COREpar Q120 ILS products on 120 VAC or up to 10
COREpar Q120 ILS products on 230 VAC.
The power-linking diagram corresponds to the North American version of the
product ONLY! If using the product in other markets, you must consult with the local
Chauvet distributor, as power linking connectors and requirements may differ in
your country or region.
Page 6 of 17
nd
2
product
Additional COREpar Q120 ILS
products
rd
3
product
COREpar Q120 ILS User Manual Rev. 1
Setup
Advertisement
Table of Contents
