Table of Contents
Advertisement
Description of each menu
FUNCTION
(default setting/value)
Wall Color
(Off)
Aspect Ratio
(Auto)
Keystone
(0)
Position
(0)
Phase
(depends on the selected input signal)
H. Size
(0)
Magnify
(1.0X)
Setting
(PC Source: Photo;
Video source: Standard)
Color Mode
(Photo)
Brightness
(50)
Contrast
(0)
Color
(0)
Tint
(0)
Sharpness
(15)
BrilliantColor™
(On)
Color Temperature
(T1)
3D Color Management
Save Settings
EN-32
DESCRIPTION
(default setting/value)
Corrects the projected picture's color when the projection surface is not
white. See
"Using Wall Color" on page 26
There are four options to set the image's aspect ratio depending on your
input signal source. See
"Selecting the aspect ratio" on page 23
details.
Corrects any keystoning of the image. See
22
for details.
Displays the position adjustment page. To move the projected image, use
the directional arrow keys. The values shown on the lower position of the
page change with every key press you made until they reach their
maximum or minimum.
Adjusts the clock phase to reduce image distortion.
Adjusts the horizontal width of the image.
Magnifies or reduces the projected image. See
searching for details" on page 22
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
mode" on page 24
for details.
Selects a picture mode that most suits your need for the image quality and
further fine-tune the image based on the selections listed on the same
page below. See
"Setting the User 1/User 2 mode" on page 24
Adjusts the brightness of the image. See
25
for details.
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 25
Adjusts the color saturation level -- the amount of each color in a video
image. See
"Adjusting Color" on page 25
Adjusts the red and green color tones of the image. See
on page 25
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 25
for details.
Adjusts white peaking while maintaining correct color presentation. See
"Adjusting BrilliantColor™" on page 25
See
"Selecting a Color Temperature" on page 25
See
"3D Color Management" on page 26
Saves the settings made for User 1 or User 2 mode.
for details.
"Correcting keystone" on page
"Magnifying and
for details.
"Selecting a picture
"Adjusting Brightness" on page
for details.
for details.
"Adjusting Tint"
"Adjusting
for details.
for details.
for details.
for
for details.
Advertisement
Table of Contents
