Table of Contents
Advertisement
Remote control
1
2
3
4
5
I
I
1.
Power
Toggles the projector between standby mode and on. See
6
"Starting up the projector" on page 17
7
the projector" on page 29
8
2.
FREEZE
Freezes the projected image. See
9
page 28
3.
Left
10
Selects the desired menu items and makes adjustments. See
11
"Using the menus" on page 18
7
4.
BLANK
12
Used to hide the screen picture. See
13
page 28
5.
MAGNIFY keys (+, -)
Magnifies or reduces the projected picture size. See
"Magnifying and searching for details" on page 22
details.
6.
MENU
Turns on the On-Screen Display (OSD) menu. Goes back to
previous OSD menu, exits and saves menu settings. See
"Using the menus" on page 18
7.
Keystone/Arrow keys (
Manually corrects distorted images resulting from an
angled projection. See
for details.
8.
AUTO
Automatically determines the best picture timings for the
displayed image. See
21
for details.
9.
Right/
Activates panel key lock. See
page 28
When the On-Screen Display (OSD) menu is activated, the
#3, #7 and #9 keys are used as directional arrows to select
the desired menu items and to make adjustments. See
"Using the menus" on page 18
10.
SOURCE
Displays the source selection bar. See
signal" on page 20
11.
MODE/ENTER
Depending upon which input signal is selected, selects an
available picture setup mode. See
mode" on page 24
Enacts the selected On-Screen Display (OSD) menu item.
12.
TIMER ON
Activates or displays an on-screen timer based on your own
timer setting. See
27
for details.
13.
TIMER SET UP
Enters presentation timer setting directly. See
presentation timer" on page 27
for details.
"Freezing the image" on
for details.
for details.
"Hiding the image" on
for details.
for details.
/ Up,
"Correcting keystone" on page 22
"Auto-adjusting the image" on page
"Locking control keys" on
for details.
for details.
for details.
"Selecting a picture
for details.
"Setting the presentation timer" on page
for details.
and
"Shutting down
for
/
Down)
"Switching input
"Setting the
EN-9
Advertisement
Table of Contents
