Table of Contents
Advertisement
FUNCTION
(default setting/value)
Quick Auto Search
(On)
Presentation Timer
(Off)
Language
(English)
Projector Position
(Front Table)
Auto Power Off
(Disable)
Blank Timer
(Disable)
Panel Key Lock
(Off)
Timer Controller
(Disable)
Splash Screen
(MITSUBISHI logo)
Quick Cooling
(Off)
High Altitude Mode
(Off)
Menu Settings
Lamp Settings
DESCRIPTION
(default setting/value)
See
"Switching input signal" on page 20
Reminds the presenter to finish the presentation within a certain time
frame. See
"Setting the presentation timer" on page 27
Sets the language for the On-Screen Display (OSD) menus. See
the menus" on page 18
for details.
See
"Choosing a location" on page 11
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 36
for details.
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 28
for details.
Disables or enables all panel key functions except
projector and keys on the remote control. See
on page 28
for details.
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Allows you to select which logo screen will display during projector
start-up. Three options are available: MITSUBISHI logo, Black screen,
or Blue screen.
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
A mode for operation in high altitude areas. See
altitude environment" on page 29
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last
key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp mode (Standard)
See
"Setting Lamp mode as Low" on page 36
Reset lamp timer
See
"Resetting the lamp timer" on page 39
Equivalent lamp hour
See
"Getting to know the lamp hour" on page 36
the total lamp hour is calculated.
for details.
for details.
for details.
"Setting Auto Power Off" on
"Hiding the image" on
I
I
Power on the
"Locking control keys"
"Operating in a high
for details.
for details.
for details.
for details on how
"Using
EN-33
Advertisement
Table of Contents
