Philips sonicare H 360 Series User Manual page 24

24
English
1
2
precautions when you follow the procedure
outlined below.
1 To deplete the rechargeable battery of any
charge, remove the handle from the charger,
turn on the toothbrush and let it run until it
stops. Repeat this step until you can no longer
turn on the toothbrush.
2 Remove and discard the brush head. Cover the
entire handle with a towel or cloth.
3 Hold the top of the handle with one hand and
strike the handle housing 0.5 inch above the
bottom end. Strike firmly with a hammer on all
4 sides to eject the end cap.
Note: You may have to hit on the end several
times to break the internal snap connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release easily
from the housing, repeat step 3 until the end
cap is released.