Philips sonicare H 360 Series User Manual page 12

12
English
45°
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees). Pressing firmly
to make the bristles reach the gumline or
slightly beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
3 Press the power on/off button to switch on
the Philips Sonicare.
4 Gently keep the bristles placed on the teeth
and in the gumline. Brush your teeth with
small back and forth motion so the bristles
reach between the teeth. Continue this
motion throughout your brushing cycle.
Note: The bristles should slightly flare. It is not
recommended to scrub as you would with a
manual toothbrush.
5 To clean the inside surfaces of the front teeth,
tilt the brush handle semi-upright and make
several vertical overlapping brushing strokes
on each tooth.