Safety Information - Delta CS-NT24 User Manual

1. Safety information

◆ The cable tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply
at the places which are inapplicable for the use of electrics such as hospital, gas station etc.
◆ To prevent the functional decline or failure, the product should not be sprinkled or damped.
◆ The exposed part of the cable tester should not be touched by the dust and liquid.
◆ During transportation and use, it is highly recommended to avoid the violent collision and vibration of the
tester, lest damaging components and causing failure.
◆ Don't leave the tester alone while charging and recharging. If the battery is found severely hot, the tester should
be powered off from the electric source at once. The tester should not be charged over 10 hours.
◆ Don't use the tester where the humidity is high. Once the tester is damp, power off immediately and move
away other connected cables.
◆ The cable tester should not be used in the environment with the flammable gas.
◆ Do not disassemble the instrument since no component inside can be repaired by the user. If the disassembly is
necessary indeed, please contact with the technician of our company.
◆ The instrument should not be used under the environment with strong electromagnetic interference
◆ Don't touch the tester with wet hands or waterish things.
◆ Don't use the detergent to clean and the dry cloth is suggested to use. If the dirt is not easy to remove, the soft
cloth with water or neutral detergent can be used. But the cloth should be tweaked sufficiently.
1