Road Sign Assist (Rsa) - Toyota Prius 2023 Quick Reference Manual

TEMPORARILY SWITCHING TO THE LOW BEAMS
Pull the lever toward you and then return it to its original position to switch to the
low beams temporarily.
The high beams are on while the lever is pulled toward you. However, after the
lever is returned to its original position, the low beams remain on for a certain
period of time. Afterwards, the Automatic High Beams will be activated again.
NOTE: It is recommended to switch to the low beams when use of the high
beams is inappropriate or the high beams may cause problems or distress to
other drivers or pedestrians nearby.

Road Sign Assist (RSA)

Using the forward-facing camera and navigation system (if equipped), Road Sign
Assist (RSA) is designed to detect certain road signs and display them on the
instrument cluster.
All vehicle actions must be driver-initiated and are not automated.
Refer to the Toyota "Owner's Manual" for additional information and limitations.
SUPPORTED TYPES OF ROAD SIGNS
The following types of road signs can be displayed.
Speed limit
No U-turn
Stop
Warning
Depending on the specifications of the vehicle, signs may be displayed
overlapping.
Do Not Enter
No Turn On Red
Yield
53