Table of Contents
Advertisement
TOYOTA SAFETY SENSE
Road Sign Assist (RSA)
Using an intelligent camera, Road Sign Assist (RSA) is designed to detect speed
limit signs, stop signs, do not enter signs and yield signs, and display them on the
Multi-Information Display (MID).*
* All vehicle actions must be driver-initiated and are not automated. See Toyota.
com/safety-sense for model applicability.
Refer to the Toyota Owner's Manual for a list of additional situations in which the
system operation may be limited.
RSA DISPLAY
When the driving support system
information is selected, a maximum of
3 signs can be displayed.
SUPPORTED TYPES OF ROAD SIGNS
Speed limit
Do Not Enter
SETTING RSA
(1) Press "
" switches and select "
(2) Press "
" switches and select "
(3) Press "
" switches and select the "Road Sign Assist on/off" setting function
and then press "
(4) Press "
" to go back to the menu.
Note: If the vehicle was last turned off while a speed limit sign was displayed
on the Multi-Information Display, the same sign displays again when the
vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on RSA operation,
settings adjustments, limitations, and precautions before attempting to use it.
™
" to select the desired setting.
54
When a tab other than the driving
support system information display is
selected, the following types of road
signs will be displayed.
• Speed limit sign
• Do Not Enter sign (when notification
is necessary)
Stop
Yield
" from the Multi-Information Display (MID).
RSA" and then press "
."
Advertisement
Table of Contents
