Activating Cruise Control - Toyota Prius 2023 Quick Reference Manual

ACTIVATING CRUISE CONTROL

(1)
Vehicle will cruise at a set vehicle speed.
(1) Press " " switch to select "Cruise Control Mode." The cruise control indicator
" " will illuminate.
(2) Using the accelerator pedal, accelerate or decelerate to the desired vehicle
speed (approximately 20 mph [30 km/h] or more), and press "
set the set vehicle speed. The set vehicle speed will be displayed on the Multi-
Information Display (MID).
ADJUSTING SET VEHICLE SPEED
(3)
Increase speed/
Resume
Decrease speed
(3) To change the set vehicle speed, press the "+" (increase) or "-" (decrease)
switch until the desired speed is displayed. Press and hold to continuously
adjust the speed in 1 mph (1.6 km/h) increments, or use a single press to adjust
in individual increments of 1 mph (1.6 km/h).
(4) Press " " switch or "
(Press the "
*
The speed control may also be canceled by depressing the brake pedal.
Note: NOTE: On steep downhills, or where there are sudden changes between
sharp up and down gradients, vehicle speed may exceed the set speed when
driving down a steep hill.
Refer to the Toyota "Owner's Manual" for additional information on Cruise Control
operation, settings adjustments, limitations, and precautions before attempting to
use it.
Press
" switch to cancel the speed control.
" switch to resume control.)
(2)
Set vehicle speed
(4)
*
Cancel
*
Cancel
51
" switch to