Chauvin Arnoux C.A 6255 Quick Start Manual

The secondary functions of the keys (written in yellow Italics below each key) can be accessed by
a short press on the yellow key, then on the key concerned.
Activate the secondary function of a keys. The
Before starting the measurement, select the desired measurement mode: inductive mode,
noninductive mode or non-inductive mode with automatic
Select the metal for the temperature compensation calculation: Cu, Al, or Other metal
Activate/deactivate the temperature compensation function to calculate the resistance
measured at a temperature other than the measurement temperature.
Activate/deactivate the alarms. The directions and high or low triggering values are
adjusted in SET-UP
Store the measurement at an address identified by an object number (OBJ) and a test
number (TEST). Two presses on MEM are required = confirmation of the location (can be
changed using the ▲▼ and ►keys), then storage.
Retrieve stored data (this function is independent of the setting of the switch) except in
the OFF and SET-UP positions. The data are viewed using the ▲▼ and ►keys. The
θ
R( ),
In SET-UP mode, select a function or increment a flashing parameter.
In SET-UP mode, select a function or decrement a flashing parameter
Select the parameter to be modified (in wraparound mode, from left to right). In SET-UP
mode, access the adjustments of a function.
In SET-UP mode, shift the decimal point and select the unit.
Immediate printing of the measurement to a serial printer. If the temperature
compensation function has been activated, the calculated result and the temperatures
concerned are also printed.
Print stored data to a serial printer.
1st press: the starting OBJ:TEST number appears on the secondary display and the
ending number on the main display (they can be changed using the ▲▼ and ► keys);
press PRINT again to start printing.
Activate/deactivate the backlighting of the display unit.
Activate and adjust the sound level/deactivate the audible signal.
C.A 6255 MICROHMETER
READ the user manual carefully
COMPLY the precautions for use
FUNCTIONS OF THE KEYS
and ALARM keys can be used.
symbol appears on the screen.
triggering.