Table of Contents
Advertisement
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
The base/router to which the handset is registered must also support this function
(
www.gigaset.com/compatibility)
If your base/router does not support this function, you can also update the firmware
via a USB cable and Gigaset Quick Sync.
The phone checks whether new firmware is available for the handset. If it is, a message is
displayed.
Start the firmware update with Yes.
Enable/disable automatic check for new firmware:
Settings
Automatic Check
Start the firmware update manually
Settings
Update
OK
The update process may take up to 30 minutes. During this time, only restricted
handset use is available.
Checking the firmware version
Settings
Current Version
Resetting a handset
Reset any individual settings and changes that you have made.
Settings
the handset's settings are reset
The following settings are not affected by a reset
•
Registration of the handset to the base station
•
Date and time
•
Directory entries and call lists
OK
System
OK
Change (
OK
System
OK . . . if there is new firmware, the update will start
OK
System
OK . . . the firmware version of the handset is displayed
OK
System
Availability and operation of the functions
may differ on your telephone.
OK
Handset Update
= enabled)
OK
Handset Update
OK
Handset Update
OK
Handset Reset
Setting the handset
OK
OK
OK
OK
Yes . . .
49
Advertisement
Table of Contents
