Operation - Profi-pumpe OASIS 200-3 Li+LED Operating Instructions Manual

3. OPERATION

l Unpack all components carefully
l Mount the solar panel (see illustration). Remove the protective film from the solar panel (if any).
Overview of components and assembly
Solar pond pump Oasis 200-3 Li&LED
If there is a rubber bung, lead the cables through it and place it on the tube in the corpus to
avoid water leakage.
Solar pond pump Oslo 900
3.1. Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar
panel is shaded. Adjust the solar panel angle to maximise the amount of solar energy collected.
3.2. Connect the pump, panel and the LED-Light on the battery (see illustration). Check whether
the flow is fully open (or else promoted little or no water).
Solar pond pump Oasis 500-3 Li&LED
Solar Oxygenator OXYGEN-3
English 3
Summer 0°- 30°
Spring/Autumn 30°- 60°
IMPORTANT!
Slightly twist the
connectors, when
pushing