Dometic Delta15F Installation And Operating Manual page 26

Installation
• Do not install the device in an area with excessive moisture.
➤ Remove all the inner and outer packaging material before setting up the bever-
age center.
6.2 Placing the beverage center
I
NOTE
• Observe the device's dimensions and safety distances when install-
ing the device (fig. 0 to fig. c, page 9).
• Ensure that the door can be opened completely and is not blocked
by other objects.
Delta15F, Delta24F, Eagle15F, Eagle24B, Eagle24F
1. Ensure that the door is locked when moving the beverage center.
2. If necessary, tape the door with duct tape.
3. Position the beverage center.
Eagle24D only
1. Fix the drawers with duct tape when moving the beverage center.
2. Attach the anti-tip brackets on the floor (fig. d, page 10).
3. Position the beverage center.
6.3 Connecting the beverage center to the power supply
A
NOTICE! Damage hazard
• Do not modify or damage the plug.
• Do not plug the beverage center in an socket that can be turned off
by a switch or pull chain.
• To avoid voltage drops and loss of performance do not use adapters,
extension cords, or power strips.
• Ensure that an residual current circuit breaker is installed to the
power supply. Seek advice from a trained electrician.
• Observe the input voltage (see chapter "Technical data" on
page 37).
I
NOTE
Let the beverage center stand upright for 24 hours before connecting it
to the power supply.
26
Delta15F–24F, Eagle15F–24B–24D–24F
EN