Specifications - Mitsubishi DiamondPoint V50LCD User Manual

15"
Table of Contents

Advertisement

Available languages

Available languages

Specifications

Monitor
Specifications
LCD Module
Viewable Image Size :
Native Resolution (Pixel Count) :
Input Signal
Display Colors
Analog input :
Maximum
Left/Right :
Viewing Angles
Up/Down :
Synchronization
Horizontal :
Range
Resolutions Supported
Active Display Area
Horizontal :
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature :
Storage Temperature :
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
DPVLCDmanualFINAL.P65
DiamondPoint V50LCD
Monitor
Diagonal :
15.0 inch
15.0 inch
1024 x 768
Video :
ANALOG 0.7 Vp-p/75 Ohms
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
16,194,277
70°/70°
55°/65°
31.5 kHz to 60 kHz (Analog)
Vertical :
56.0 Hz to 75.0 Hz
720 x 400*
:VGA text
1
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768 @ 60 Hz to 75 Hz .............. NEC-Mitsubishi Electronics Display cites
304 mm/12.0 inches
Vertical :
228 mm/9.0 inches
AC100 - 240V, 50/60 Hz
0.6A @ 100-120V, 0.35A @ 220-240V
356 mm (W) x 356.5 mm (H) x 150 mm (D)
14.0 inches (W) x 14.0 inches (H) x 5.9 inches (D)
3.0 kg
6.4 lbs
5°C to 35°C/41°F to 95°F
Humidity :
30% to 80%
Feet :
0 to 12,000 Feet
-10°C to 60°C/14°F to 140°F
Humidity :
10% to 85%
Feet :
0 to 40,000 Feet
9
9
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.297 mm dot
pitch; 300cd/m
white luminence;
2
500:1 contrast ratio, typical
Depends on display card used.
Automatically
Automatically
Some systems may not support all modes listed.
recommended resolution at 60 Hz for
optimal display performance.
10/27/03, 12:42 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents