Mitsubishi DiamondPoint V50LCD User Manual page 6

Quick Start
LCD Setup
To attach the MultiSync LCD monitor to your system, follow these instructions:
1. Make sure the computer and the LCD monitor are both turned off.
2. Plug the end of the video signal cable of LCD monitor in the video signal connector of the
computer.
NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC-Mitsubishi Electronics
Display of America, Inc. at (800) 632-4662. Display of America, Inc. at (800) 632-4662. Display of America, Inc. at (800) 632-4662. Display of America, Inc. at (800) 632-4662. Display of America, Inc. at (800) 632-4662.
3. Plug the power cord into the female end of the AC adapter and power cord into the AC
adapter.
4. Plug the power cord into a wall socket.
NOTE: If you use this monitor at AC100-240V, please refer to Recommended Use section of NOTE: If you use this monitor at AC100-240V, please refer to Recommended Use section of
NOTE: If you use this monitor at AC100-240V, please refer to Recommended Use section of NOTE: If you use this monitor at AC100-240V, please refer to Recommended Use section of NOTE: If you use this monitor at AC100-240V, please refer to Recommended Use section of
this manual for proper selection of power cord. this manual for proper selection of power cord.
this manual for proper selection of power cord. this manual for proper selection of power cord. this manual for proper selection of power cord.
NOTE: Please use the supplied AC adapter. NOTE: Please use the supplied AC adapter. NOTE: Please use the supplied AC adapter.
NOTE: Please use the supplied AC adapter. NOTE: Please use the supplied AC adapter.
5. First, turn on the LCD monitor and then the computer.
6. Adjust the user controls to optimize your personal preference.
DPVLCDmanualFINAL.P65
–continued
4
4 10/27/03, 12:42 PM