Installing The Water Kit - nVent SCHROFF LHX+ User Manual

6.1

Installing the water kit

Outflow of cooling water can cause damage!

Works on the cooling water supply should be carried out by a refrigeration engineer
or suitably trained plumber.

Close the tap in the water supply

Open the vent valve (1)

Open the two union nuts (2)

Remove the pipe (3)

Mount the water kit with the gaskets (4)

Mount the connection cable between the water kit and the controller.

Connect the cable to the connector (W15) at the controller box

Vent the system
ATTENTION
Date: 2021/04/07 Page
: 36 of 47