4 Monitoring and Configuration
The LHX+ can be configured or the operating parameters can be monitored using a web
interface or via the remote display.
It is also possible to configure and monitor the operating parameters via Modbus TCP (IP) or
Modbus RTU (RS485).
For this purpose the LHX controller can be connected to the nVent Schroff Guardian
Management Gateway which natively supports the control of the LHX+ cooling module.
A list of Modbus registers is available on request.
Alternatively, control and monitoring via SNMP or BACnet is also available as an option.
4.1
Web Interface
Access to the web interface: 192.168.0.101
User: siteadmin
PW: 12345
4.1.1 Web interface screens
Screen System: Overview of the system parameters
Date: 2021/04/07
Page
: 25 of 47