Transport And Assembly; Safety Rules For Transport And Assembly - nVent SCHROFF LHX+ User Manual

3 Transport and assembly

3.1

Safety rules for transport and assembly

Risk of injury and/or material damage from falling or tipping loads!
 When transporting the cabinet with a pallet truck, forklift or crane,
do not step under the suspended load.
 Only use approved equipment and slings to lift the cabinet.
 During transport and assembly, the corresponding personal
protective equipment must be worn.
 The cabinet is top-heavy and can tip over. At least 2 people are
required when moving and unpacking the cabinet
Risk of accidents due to insufficiently qualified personnel!
 The installation may only be carried out by qualified personnel
who are authorized to do so according to the valid safety
regulations, e.g. by authorized specialized companies or
authorized departments of the company.
 When installing the system, the corresponding personal protective
equipment must be worn.
Use eye
protection!
The specified personal protective equipment must be used during all assembly and transport
work.
Risk of condensation forming!
After storage at temperatures below 10 °C, sufficient acclimatization time must be allowed
before the unit is switched on.
⚠ WARNING
⚠ WARNING
Use hand Use foot
protection! protection!
ATTENTION
Date: 2021/04/07
Use head
protection!
Page
: 12 of 47