Cleaning Your Monitor - Mitsubishi Diamond Plus 73 User Manual

• If reflected light makes it hard for you to see your screen, use an
anti-glare filter.
• Adjust the monitorís brightness and contrast controls to enhance
readability.
• Use a document holder placed close to the screen.
• Position whatever you are looking at most of the time (the screen or
reference material) directly in front of you to minimize turning your
head while you are typing .
• Get regular eye checkups.

Cleaning Your Monitor

When cleaning the monitor, please follow these guidelines:
• Always unplug the monitor before cleaning.
• Wipe the screen and cabinet front and sides with a soft cloth.
• If the screen requires more than dusting, apply a household window
cleaner to a soft cloth to clean the monitor screen.
•
•
•
CAUTION
•
Ergonomics
To realize the maximum ergonomics benefits, we recommend the
following :
• Adjust the brightness until the background raster disappears .
• Do not position the contrast controls to its maximum setting .
• Use the preset size and position controls with standard signals .
• Use the preset color setting and sides Left / Right controls.
• Use non-interlaced signals with a vertical refresh rate between
75-120Hz.
• Do not use primary color blue on a dark background, as it is
difficult to see and may produce eye fatigue due to insufficient
contrast.
Do not use benzene, thinner or any volatile
substances to clean the unit as the finish may be
permanently marked.
Never leave the monitor in contact with rubber or
vinyl for an extended time period.
Do not spray directly on the screen as cleaner may
drip into the monitor and damage the circuitry.
Never use an abrasive cleaner on the screen
surface as this will damage the anti-reflection
coating.
E-8