Ddc; Location Considerations; Cleaning Your Monitor - Mitsubishi DIAMOND PRO 900U NFJ9905SKHUW User Manual

1.4

DDC

The monitor includes the DDC
nication channel over which the monitor automatically informs the host system about its capabilities
(e.g. each supported resolution with its corresponding timing).
DDC is routed through previously unused pins of the 15-pin VGA connector.
The system will perform "Plug and Play" feature if both, monitor and host, implement the DDC
protocol.
1.5

Location Considerations

When setting up and using the monitor, keep the following in mind:
* For optimum viewing, avoid placing the monitor against a bright background or where sunlight or
other light sources may reflect on the display area of the monitor; place the monitor just below eye
level.
* Place the monitor away from strong magnetic or electromagnetic fields, such as high capacity
transformers, electric motors, large current power lines, steel pillars, etc....
Magnetism can cause distortion in the picture and/or color purity.
* Avoid covering the slots or openings of the monitor. Allow adequate ventilation around the monitor
so the heat from the monitor can properly dissipate. Avoid putting the monitor into any enclosure
that does not have adequate ventilation.
* Avoid exposing the monitor to rain, excessive moisture, or dust, as this can cause a fire or shock
hazard.
* Avoid placing the monitor, or any other heavy object, on the power cord.
Damage to the power cord can cause a fire or electrical shock.
* When transporting the monitor, handle it with care.
CAUTION
Keep your fingers away from the pivot area of the tilt/swivel base.
1.6

Cleaning Your Monitor

When clean the monitor, please follow these guidelines:
* Always unplug the monitor before cleaning.
* Wipe the screen and cabinet front and sides with a soft cloth.
* If the screen requires more than dusting, apply a household window cleaner to a soft cloth to clean
the monitor screen.
CAUTION
Do not use benzene, thinner or any volatile substances to clean the unit as the finish may be
permanently marked. Never leave the monitor in contact with rubber or vinyl for an extended
time period.e the monitor in contact with rubber or vinyl for an extended time period.
TM TM
1 and DDC 2B feature. DDC (Display Data Channel) is a commu-
- 1-8 -