Setting The Self-Timer - Minox DC 6011 User Manual

Setting the Self-timer

This setting allows images to be captured with the self-timer.
1. Slide the mode switch to [
2. Toggle the button to select the setting.
For the [ ] mode.
OFF [ 10s] 10 sec.
[ 10+2s ] 10+2 sec.
For the [ ] mode.
OFF [ 10s ] 10 sec.
3. Compose the image, press the shutter button down halfway, then press it down fully.
The self-timer LED flashes and the image is captured after the preset time has elapsed.
The countdown is displayed on the LCD monitor.
To cancel the self-timer during operation, press the SET button.
The table below will help you choose the appropriate self-timer mode:
Self-timer mode
[ 10s] 10 sec.
[ 2s] 2 sec.
[ 10+2s]10+2 sec.
] or [ ].
[ 2s ] 2 sec.
[ 2s ] 2 sec.
Description
The image is captured about 10 seconds after the shutter button is pressed.
The image is captured about 2 seconds after the shutter button is pressed.
One image is captured about 10 seconds after the shutter button is pressed,
and the other image is captured again after 2 seconds. This is convenient
when capturing group images in succession.
EN-35