Table of Contents
Advertisement
ge counter will decrease from 60. For Super Low Resolu-
tion mode, the image counter will decrease from 99.
Distance setting
The lens of the MINOX DD1 allows you to select and
manually set three depths of field of your choice. To do
this you simply have to turn the lens ring to the desired
Shooting images with the self-timer
You can also use the DD1 with the 10-second self-timer
and put yourself in the picture, for example. To do this
please follow the below instructions.
1. Switch on your DD1 by pressing the On/Mode button.
2. Press the On/Mode button until the
self-timer mode "St" appears.
3. Press the shutter release to confirm and set this mode.
4. Compose your subject through the viewfinder. Place
your DD1 on a flat and steady base.
12
setting:
= depth of field from
(infinity)
1.5 m (4.92 ft) to infinity
0.5 m = depth of field from
0.4 m to 0.7 m (0.52 to 2.30 ft)
0.9 m = depth of field from
0.7 m to 1.3 m (2.30 to 4.26 ft)
5. Press the shutter release once and you will hear short
beeping signals. Now you have ten seconds to put
yourself in the picture before the shutter is released to
capture the image. After each shot with the self-timer
the camera automatically switches back to the basic
camera mode (with LCD displaying 2 digits).
Sources of error when photograhing
• Always make sure your finger, the camera strap or
other objects are not covering the lens while you are
shooting images.
• Always make sure that the lens is clean. If it is
soiled, follow the instructions given in chapter
"Camera maintenance" for cleaning the lens.
• Hold the camera steady during the shot to avoid
blurred images.
Deleting images
With the DD1 you can either delete the last taken image
or you can also delete all of the stored images. Please
follow the instructions given below to delete images
from the memory.
Delete the last image taken
1. Switch your DD1 on by pressing the On/Mode button.
Advertisement
Table of Contents
