Table of Contents
Advertisement
GETTING STARTED
Attaching the Camera Strap
Attach the camera strap as shown in the illustration.
Inserting and Removing the Battery (Optional Accessory)
We highly recommend using specified rechargeable lithium-ion battery (3.7V, 750mAh-820mAh) to fully
demonstrate this camera's function. Charge the battery before using the camera. Make sure that the
power of the camera is off before inserting or removing the battery.
Inserting the Battery
1. Open the battery / SD memory card cover.
2. Insert the battery in the correct orientation shown.
Tilt the battery lock lever in the direction of the arrow and
orient the battery so that its label is facing to the rear side of
the camera, and then insert the battery.
3. Close the battery / SD memory card cover.
Removing the Battery
Open the battery / SD memory card cover and then release the battery
lock lever. When the battery has come out a little, slowly pull it out the
rest of the way.
EN-17
Advertisement
Table of Contents
