Table of Contents
Advertisement
Turning the Power On/Off
Load the battery and insert an SD memory card before starting.
Turning the power on
Press the POWER button to turn the power on.
The status LED lights green and the camera is initiated.
When the power is turned on, the camera will start in the mode
that was set.
Turning the power off
Press the POWER button to turn the power off.
The power is turned off automatically when the camera has not been operated for a fixed period time.
To resume the operation condition, turn the power on again. Refer to section in this manual titled
"Auto OFF" in the Setup Menu (In Photography Mode) for further details.
EN-20
Advertisement
Table of Contents
