Table of Contents
Advertisement
Canceling the Protection
To cancel protection for only one image, display the image that you want to remove the image protection.
1. Select [Protect] with the
2. Select [Single] or [All] with the
3. Select [Cancel Protect] with the
The removal of image protection is executed and the camera returns to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the
2. Select [Select] with the
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the
The protect icon [
pressing the
multiple images.
4. Press the SET button.
Protection and cancellation the protection are executed and the camera returns to playback
mode.
Formatting an SD memory card overrides protection, and erases all images regardless of
their protected status.
/
buttons from the playback menu, and press the SET button.
/
buttons, and press the SET button.
/
buttons, and press the SET button.
/
buttons from the playback menu, and press the SET button.
/
buttons, and press the SET button.
] is displayed with protected images. Selecting a protected image and
button again will cancel the protection. This procedure is repeated to select
/
/
/
buttons, and press the
button.
EN-49
Advertisement
Table of Contents
