Using The Self Timer; Adjusting The White Balance (Wb); Adjusting The Exposure Values (Ev) - Minox DCM User Manual

Using the Self Timer

Put yourself in the picture using the Self Timer function. The timer has a 10 second delay.
In Camera Mode press the Select button (SEL/OK); This provides access to the Camera Menu.
Select Self Timer and press the Select button (SEL/OK) again. This provides access to the Self
Timer Menu. Select On and press the Select button (SEL/OK) to confirm your selection.
The Camera Module is now in Self Timer Mode, the symbol appears on the display.
Frame your picture as required. To do this, you can still use the zoom function as normal.
After pressing the shutter button you have ten seconds to put yourself in the picture before the
shutter is released.
Camera

Adjusting the White Balance (WB)

The white balance ensures natural color rendition of your pictures. The Camera Module is set to
automatic white balance in the factory. In critical light conditions you can selectively adjust the
white balance.
In Camera Mode press the Select button (SEL/OK); this provides access to the Camera Menu.
Select WB and press the Select button (SEL/OK) again. In the WB Menu you can choose between 6
settings: Auto (automatic), Daylight, Cloudy, Lamp, Tungsten, Night Press the Select button
(SEL/OK) to confirm your selection.

Adjusting the Exposure Values (EV)

In critical light conditions you can manually adjust the brightness of your images.
In Camera Mode press the Select button (SEL/OK); this provides access to the Camera Menu.
Select EV and press the Select button (SEL/OK) again. Now reduce or increase the exposure time
using the Up or Down button. Press the Select button (SEL/OK) to confirm your adjustment.
Camera
6