1. Manuals
  2. Brands
  3. Allegion Manuals
  4. Touch terminals
  5. Schlage HandPunch 2000
  6. User manual

Allegion Schlage HandPunch 2000 User Manual

Hide thumbs Also See for Schlage HandPunch 2000:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
HP-2000
Terminal User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Allegion Schlage HandPunch 2000

Summary of Contents for Allegion Schlage HandPunch 2000

  • Page 1 All manuals and user guides at all-guides.com HP-2000 Terminal User’s Guide...
  • Page 2 This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglemente sure le materiel brouilleur du Canada. © 2014 Allegion Document Part Number: 70100-6007 – Revision 3.3 – 07/16/14 HandPunch is a trademark of Schlage Biometrics, Inc.

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com Table of Contents Introduction Biometrics Principle of Operation Specifications Planning an Installation Site Preparation HandPunch Placement Wiring Power Input Battery Backup Operation HandPunch to Host Computer Connection RS-232 Host Computer Connection Modem Host Computer Connection Mechanical Installation Wall Plate Installation Wiring Connections...
  • Page 4 All manuals and user guides at all-guides.com...

  • Page 5: Introduction

    All manuals and user guides at all-guides.com Introduction The HandPunch 2000 is a member of the Schlage Biometrics’ line of biometric hand geometry Time and Attendance Terminals . The HandPunch records and stores the three- dimensional shape of the human hand for comparison and identity verification. Upon verification, the HandPunch records the time, date, user ID number, and collected time and attendance data for collection by a host computer.

  • Page 6: Principle Of Operation

    All manuals and user guides at all-guides.com Introduction Principle of The HandPunch uses low-level infrared light, optics, and a CMOS (IC chip) camera to capture a three-dimensional image of the hand. Using advanced microprocessor Operation technology, the HandPunch converts the image to an electronic template. It stores the template in a database with the user’s ID number.
  • Page 7 All manuals and user guides at all-guides.com HandPunch 2000 Manual HAND PLACEMENT DISPLAY VERIFICATION LIGHTS LCD DISPLAY NUMERICAL KEYPAD FUNCTION KEYS PLATEN AND GUIDE PINS Figure 1-1: The HandPunch 2000...

  • Page 8: Specifications

    All manuals and user guides at all-guides.com Introduction Specifications Table 1: Specifications Size: 8.85 inches wide by 11.65 inches high by 8.55 inches deep 22.3 cm wide by 29.6 cm high by 21.7 cm deep Power: 12 to 24 VDC or 12 to 24 VAC 50-60 Hz, 7 watts Weight: 6 lbs (2.7 kg) –...
  • Page 9 All manuals and user guides at all-guides.com HandPunch 2000 Manual Options The HandPunch has the following options available. See Technical Note 70200-0012 rev C • Backup Battery Support See Technical Note 70200-0013 rev C • Modem Communication Hand Readers are UL Listed as stand alone units only (i.e. the card reader function UL Compliance has not been evaluated by UL).
  • Page 10 All manuals and user guides at all-guides.com Introduction This page is intentionally blank.

  • Page 11: Planning An Installation

    All manuals and user guides at all-guides.com Planning an Installation Site Before you begin installation, check the site blueprints, riser diagrams, and specifications Preparation for important information about HandPunch location and for other systems that connect to the HandPunch. Look for any existing wall preparations and wiring that other contractors may have installed for the HandPunch.

  • Page 12: Wiring

    All manuals and user guides at all-guides.com Planning an Installation Wiring Two basic circuits typically connect to the HandPunch: • Power Input • HandPunch to Host Computer - RS-232 - modem The minimum wire size for these circuits is AWG 22; the maximum is AWG 18. Power Input The HandPunch uses an internal switching regulator to obtain internal operational power.

  • Page 13: Handpunch To Host Computer Connection

    All manuals and user guides at all-guides.com HandPunch 2000 Manual Additional options installed and specific configurations within the HandPunch make it difficult to predict precisely how long battery support will last, but in general two hours of battery operation can be expected. While operating on battery backup due to loss of main input power, the battery output voltage is constantly monitored by internal circuitry.

  • Page 14: Modem Host Computer Connection

    All manuals and user guides at all-guides.com Planning an Installation Modem Host The HandPunch is also available with an optional modem module for telephone line communications between the HandPunch network and the host computer. When Computer connecting via modem, one HandPunch terminal must be configured with the modem Connection option.

  • Page 15: Mechanical Installation

    All manuals and user guides at all-guides.com Mechanical Installation Select an installation location based on the guidelines provided in the Planning an Installation section beginning on page page 9. Wall Plate Installation Wall Preparation NOTE For the following procedure protect the HandPunch from the dust and debris generated during the wall plate installation process.
  • Page 16 All manuals and user guides at all-guides.com Mechanical Installation 5. Align a bubble level with the top edge of the wall plate and gently rotate the wall plate until the bubble level shows that the top edge of the wall plate is level. 6.
  • Page 17 All manuals and user guides at all-guides.com HandPunch 2000 Manual Wall Plate SURFACE CONDUIT ENTRY POINT 50" Reference (127 cm) to Top of Wall Plate 42.75" (108.6 cm) 42.5" HandPunch (108 cm) Finished Floor Figure 3-2: HandPunch Wire Routing Layout Dust and debris surrounding the HandPunch can drastically affect the terminal’s NOTE operation.
  • Page 18 All manuals and user guides at all-guides.com Mechanical Installation HOLE 2 UPPER SCREWS SURFACE CONDUIT ENTRY REAR OF TERMINAL Figure 3-3: Attaching the HandPunch to the Wall Plate...

  • Page 19: Wiring Connections

    All manuals and user guides at all-guides.com Wiring Connections Once the HandPunch is attached to the wall plate the wiring connections to the HandPunch can be made (see Figure 4-1). J7 Battery Reset WALL Wall Plate Jumper Switch Power Top of Optional Modem Connectors Serial RS-232...
  • Page 20 All manuals and user guides at all-guides.com Wiring Connections Table 2: RS-232 Serial Connection J8 Pin Signal Connection Ground Receive Data Input (from external device) Transmit Data Output (to external device) Ready to Send Output (to external device) RS-232 Pins Figure 4-2: J4 - RS-232 Jack Pinout...
  • Page 21 All manuals and user guides at all-guides.com HandPunch 2000 Manual Connection HandPunch to Host Serial Cable Serial Port Computer RS-232 Serial Unit Host Computer Figure 4-3: Host PC to RS-232 Connection HandPunch RJ-11 RJ-11 RSI Supplied Cable (Black) Jack Modem Port Modem Unit RJ-11 Telephone Outlet Figure 4-4: Host PC to HandPunch Modem Connection...

  • Page 22: Erasing The Memory

    All manuals and user guides at all-guides.com Erasing the Memory There are two options when erasing the memory of the HandPunch. 1. Setup 2. All The erasing of the setup will set the HandPunch’s address, passwords, etc. back to factory defaults. Choosing the All option will take the HandPunch’s setup back to factory defaults plus erase all user databases and datalogs.

  • Page 23: Closing The Handpunch

    All manuals and user guides at all-guides.com Closing the HandPunch Before closing the HandPunch clear all dust and debris away from the HandPunch. With the wall mount latch in the unlocked position, swing the body of the HandPunch up and lock the latch into place with the key provided with the HandPunch (see Figure 6-1).

  • Page 24: Enter Command Menu

    All manuals and user guides at all-guides.com Enter Command Menu Press the CLEAR ENTER keys simultaneously to enter a command menu. If No One is 1. The display appears as follows. Enrolled in the HandPunch ENTER PASSWORD 2. Press the default password for the menu you wish to enter. Press for the Service Menu.
  • Page 25 All manuals and user guides at all-guides.com HandPunch 2000 Manual ENTER PASSWORD 4. Enter the password for the menu you wish to enter. The default passwords are as follows. Press for the Service Menu. Press for the Setup Menu. Press for the Management Menu.

  • Page 26: Navigating Command Menus

    All manuals and user guides at all-guides.com Enter Command Menu Navigating Once you have entered a command menu, there are three options available for navigating Command the command menu system. Menus 1. Press to enter the command shown on the display. 2.
  • Page 27 All manuals and user guides at all-guides.com This page is intentionally blank...

  • Page 28: Programming The Handpunch

    All manuals and user guides at all-guides.com Programming the HandPunch The HandPunch is programmed via a series of command menus. A summary of the menus and commands is given in Table 3. Table 3: Basic Command Mode Structure Service Menu Setup Menu Management Menu Enrollment Menu...
  • Page 29 All manuals and user guides at all-guides.com HandPunch 2000 Manual The HandPunch automatically assigns Authority Level 0 to users enrolled by the Add Employee command. Authority Level 5 is automatically assigned to users enrolled by the Add Supervisor command. NOTE Until a user has been assigned to Supervisor, every user can access every menu.
  • Page 30 All manuals and user guides at all-guides.com Programming the HandPunch System Management Once a HandPunch system is in operation the following commands are used for system management. List Users – List the Users authorized to use a HandPunch. This is done through the Management Menu.

  • Page 31: Service Menu

    All manuals and user guides at all-guides.com HandPunch 2000 Manual Service Menu The Service menu commands provide information that help you determine if the HandPunch is performing within normal operating parameters and identify the status of the unit’s inputs and outputs. The following section provides a brief summary of the Service Menu commands.
  • Page 32 All manuals and user guides at all-guides.com Programming the HandPunch Calibrate The Calibrate command displays the HandPunch’s exposure values, allowing you to verify these values are within normal operating parameters. The standard operating parameters are shown in Table 5 Table 5: Normal Operating Parameters Parameter Normal Range Row “r”...

  • Page 33: Setup Menu

    All manuals and user guides at all-guides.com HandPunch 2000 Manual Setup Menu The Setup menu commands allow you to set the basic operating parameters for the HandPunch unit. The following section provides a brief summary of all the parameters that may be set on a HandPunch unit. Once in the Command Menu, you can step through and set the parameters for each NOTE command sequentially.
  • Page 34 All manuals and user guides at all-guides.com Programming the HandPunch Table 6: Setup Command Menu Setup Menu Password = 2 Set Language Select Language Set Date Format Select Date Format Set Time and Date Month (MM) Day (DD) Year (YY) Hour (HH) Minute (MM) Set Address...
  • Page 35 All manuals and user guides at all-guides.com HandPunch 2000 Manual Set Language The Set Language command allows the language shown on the HandPunch’s display to be “localized” for a variety of countries. - English - German - Japanese - Russian - French - Indonesian - Italian...

  • Page 36: Management Menu

    All manuals and user guides at all-guides.com Programming the HandPunch Management Menu The Management menu commands allow you to manage employee data stored in a HandPunch unit. The following section provides a brief summary of the employee data that may be manipulated on a HandPunch unit. Navigating Enter the appropriate password to enter the Setup command menu.
  • Page 37 All manuals and user guides at all-guides.com HandPunch 2000 Manual List Users The List Users command allows you to display or print a list of all the employees enrolled in a HandPunch. Set User Data The Set User Data command allows you to set an employee’s Reject Threshold, adjusting the hand read threshold for one employee without affecting the threshold of other employees.

  • Page 38: Enrollment Menu

    All manuals and user guides at all-guides.com Programming the HandPunch Enrollment Menu Enrollment is the process of recording a hand image and associating it with an ID number. The first person to enroll in the HandPunch has access to all command menus. This person should enroll using the Add Supervisor command (see page page 39).
  • Page 39 All manuals and user guides at all-guides.com HandPunch 2000 Manual Preparation Here are a few guidelines to help you prepare for an enrollment session. • You can enroll one person or a group of people during an enrollment session. • Each user must have a unique personal identification (ID) number. It will save you considerable time if you assign the ID numbers in advance.
  • Page 40 All manuals and user guides at all-guides.com Programming the HandPunch Left Hand Some right hands cannot be used in the HandPunch due to disabilities such as missing fingers. You can enroll a user with the left hand facing palm side up. The techniques for Enrollment left hand enrollment are the same as for standard enrollment.
  • Page 41 All manuals and user guides at all-guides.com HandPunch 2000 Manual Enrollment There are three commands available from the Enrollment command menu. Commands • Add Employee • Add Supervisor • Remove User Refer to “Table 12” to identify the command you need to perform. Step through all previous commands until you reach the desired command.

  • Page 42: Special Menu

    All manuals and user guides at all-guides.com Programming the HandPunch Special Menu The Special menu has one command – Special Enroll. This command accommodates users with disabilities that make it difficult or impossible to use a HandPunch in its standard way. The following section provides a brief description of the Special Menu command.
  • Page 43 All manuals and user guides at all-guides.com HandPunch 2000 Manual This page intentionally left blank...

  • Page 44: Handpunch Maintenance

    All manuals and user guides at all-guides.com HandPunch Maintenance A minimum amount of system maintenance is required to keep HandPunchs fully functional. HandPunchs should be cleaned periodically to prevent an accumulation of dust from affecting the HandPunch’s readability. User Scores should be reviewed periodically to ensure the HandPunch is performing properly.
  • Page 45 All manuals and user guides at all-guides.com HandPunch 2000 Manual User Score Periodically check users’ scores (refer to the Read Score section on page page 38). Scores should average under 30. Occasionally a user will score above 30. This is not necessarily an indication of poor performance.

  • Page 46: Appendix A -Tips For A Successful Installation

    All manuals and user guides at all-guides.com Appendix A - Tips Appendix A Tips for a successful Installation HandPunch • Think of the HandPunch as a camera • Clean the HandPunch before it gets dirty • Use non-abrasive cleaners such as glass cleaners and non-abrasive and clean cloths •...

  • Page 47: Appendix B -Noted Board Configuration Differences

    All manuals and user guides at all-guides.com HandPunch 2000 Manual Appendix B Noted Board Configuration Differences Because of Schlage Biometrics’ camera retrofit of the HandPunch some changes have been made to the main PCB and they are listed as follows: •...

  • Page 48: Appendix C -Mechanical Installation

    All manuals and user guides at all-guides.com Appendix C - Mechanical Installation Appendix C Mechanical Installation Select an installation location based on the guidelines provided in the Planning an Installation section beginning on page page 9. Wall Plate Installation Wall Preparation NOTE For the following procedure protect the HandPunch from the dust and debris generated during the wall plate installation process.
  • Page 49 All manuals and user guides at all-guides.com HandPunch 200 Manual 5. Align a bubble level with the top edge of the wall plate and gently rotate the wall plate until the bubble level shows that the top edge of the wall plate is level. 6.
  • Page 50 All manuals and user guides at all-guides.com Appendix C - Mechanical Installation Wall Plate SURFACE CONDUIT ENTRY POINT 50" Reference (127 cm) to Top of Wall Plate 42.75" (108.6 cm) 42.5" HandPunch (108 cm) Finished Floor Figure 12-2: HandPunch Wire Routing Layout Dust and debris surrounding the HandPunch can drastically affect the terminal’s NOTE operation.
  • Page 51 All manuals and user guides at all-guides.com HandPunch 200 Manual LEVELING HOLE 2 UPPER SCREWS SURFACE CONDUIT ENTRY KEYHOLE HOLES 3 LOWER MOUNTING SCREWS REAR OF TERMINAL Figure 12-3: Attaching the HandPunch to the Wall Plate...
  • Page 52 All manuals and user guides at all-guides.com Appendix C - Mechanical Installation Wiring Connections Once the HandPunch is attached to the wall plate the wiring connections to the HandPunch can be made (see Figure 12-4). J7 Battery Wall Plate WALL Jumper Top of Serial RS-232...
  • Page 53 All manuals and user guides at all-guides.com HandPunch 200 Manual Table 10: RJ-45/RS232 Serial Connection J8 Pin Signal Connection - not used - - not used - - not used - Ground Rx Data Receive Data Input (from external device) Tx Data Transmit Data Output (to external device) - not used -...
  • Page 54 All manuals and user guides at all-guides.com Appendix C - Mechanical Installation HandPunch Connection Connection RJ-45 to Serial to Host Serial Port Serial Cable Converter Computer RS-232 Serial Unit Host Computer Figure 12-6: Host PC to HandPunch Modem Connection HandPunch RJ-11 RJ-11 RSI Supplied Cable (Black)
  • Page 55 All manuals and user guides at all-guides.com HandPunch 200 Manual Setting the DIP Switches The DIP Switch settings perform three tasks for the HandPunch (see Figure 12-8). • Set End of Line (EOL) Termination to match the type of termination needed by the network.
  • Page 56 All manuals and user guides at all-guides.com Appendix C - Mechanical Installation End of Line Termination helps to ensure clean data signals are transmitted through the network wiring. Termination is applied to the end-of-line (EOL) HandPunch in the network daisy- Termination chain.
  • Page 57 All manuals and user guides at all-guides.com HandPunch 200 Manual Erasing the Perform the following steps to erase both the configuration data and the user database. HandPunch Setup and User 1. With system power OFF, set both switches 4 and 5 ON. Database 2.
  • Page 58 All manuals and user guides at all-guides.com Appendix C - Mechanical Installation Closing the HandPunch Before closing the HandPunch, ensure dip switches 4 and 5 are OFF (refer to Figure 12-8 on page page 53). Clear all dust and debris away from the HandPunch. With the wall mount latch in the unlocked position, swing the body of the HandPunch up and lock the latch into place with the key provided with the HandPunch (see Figure 12-9).

  • Page 59: Appendix D -Troubleshooting Guide

    All manuals and user guides at all-guides.com HandPunch 2000 Manual Appendix D Troubleshooting Guide Display Messages During Verification Various messages can appear on the HandPunch’s display during hand verification. These messages are defined in Table 11. Table 11: Display Messages During Verification Message Definition PLACE HAND...
  • Page 60 All manuals and user guides at all-guides.com Appendix D - Troubleshooting This is called a “lockout.” Before the rejected ID number can be used again, another employee or a supervisor must successfully verify at the HandPunch. • If you enter your ID number, but do not place your hand on the platen, the HandPunch will time-out in about 25 seconds.

  • Page 61: Glossary

    All manuals and user guides at all-guides.com Glossary Address, HandPunch A HandPunch Address is a unique identification number assigned to a HandPunch. Each HandPunch on a network must be assigned a unique address. American Wire Gauge is a U.S. standard set of wire conductor sizes.

  • Page 62: Limited Warranty

    All manuals and user guides at all-guides.com Limited Warranty Limited Warranty Schlage Biometrics, Inc. (the “Company”) warrants to the original user the products manufactured by the Company (the “Product”) to be free of defects in material and workmanship for a period of three months from the date of purchase by such user or six months from the date of shipment from the factory, whichever is sooner, provided: 1.
  • Page 63 All manuals and user guides at all-guides.com...
  • Page 64 About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world.

This manual is also suitable for:

Schlage hp-2000

Table of Contents