Stealth Products i2i Owner's Manual
Upper torso support system
Hide thumbs
Also See for i2i:
- User's manual and maintenance manual (20 pages) ,
- Owner's manual (8 pages)
Related Manuals for Stealth Products i2i
Summary of Contents for Stealth Products i2i
- Page 1 Upper Torso Support i2i Upper Torso Support System Owner’s Manual - Maintenance Guide i2i Upper Torso Support System...
-
Page 2: Table Of Contents
Chin Prompt ....................5 Placement of the Chin Prompt ............5 Fitting the Chin Prompt ................. 5 Installation Instructions .............. 6-7 Mounting the i2i to Hardware ............6 Link Hardware.................... 6 Flip Down Hardware ................7 Offset Link Hardware ................7 First-Time Use................... -
Page 3: Customer Satisfaction
For further assistance, or more advanced applications, please contact your supplier or Stealth Products at (512) 715-9995 or toll free at (800) 965-9229. Always keep the operating instructions in a safe place so they may be referenced as necessary. -
Page 4: Important Information
Warranty Our products are designed, manufactured, and produced to the highest of standards. If any defect in material or workmanship is found, Stealth Products will repair or replace the product at our discretion. Any implied warranty, including the implied warranties of merchantability and fitness for a particular purpose, shall not extend beyond the duration of this warranty. -
Page 5: Warning Labels
Stealth Products does not hold responsibility for final integration of final assembly of product to end user. Stealth Products is not liable for user death or injury. Testing Initial setup and driving should be done in an open area free of obstacles until the... -
Page 6: Design And Function
Fitting the i2i It is recommended that the framework of the i2i follow the contour of the neck, shoulders and chest. •... -
Page 7: Chin Prompt
Design and Function Chin Prompt The Chin Prompt is to be used only with direct supervision. It is intended to be used only as a therapeutic tool, or for additional assistance for feeding, communication, therapy, and limited periods of time to increase the uses ability to attend to an activity. -
Page 8: Installation Instructions
Installation Instructions Mounting the i2i to Hardware To mount the i2i to the headrest hardware: 1. Place the 17mm ball of the mounting hardware into the mounting socket in the rear of the i2i. 2. Place the split ring over the... -
Page 9: Flip Down Hardware
Installation Instructions Flip Down Hardware To use the flip down function: • Two 1/4-20 x 3/4" Socket Head Screws • Four 10-32 x 3/4C Socket Head Screws (For mounting to the Seat Back). Offset Link Hardware The offset link hardware offers the same adjustability as the standard link hardware but uses 15mm square tubing and adds a posterior offset. -
Page 10: First-Time Use
User Testing It is important that the customer is fully aware of the installation, how the i2i and Chin Prompt function, and how they can be adjusted to gain as much mobility as possible. -
Page 11: Care And Maintenance
Machine wash the cover in cold water on delicate cycle and drip dry. • Do not allow the foam to get wet. • Do not use the i2i without the cover in place. To wash sheepskin covers: • Remove the cover from the i2i •... - Page 12 © 2022, Stealth Products, LLC Warranty Information Home Page Online User Manual Stealth Products, LLC · info@stealthproducts.com · www.stealthproducts.com (800) 965-9229 | (512) 715-9995 | 104 John Kelly Drive, Burnet, TX 78611 P91D183R6 i2i Upper Torso Support.afpub Feb 25, 2022...
Need help?
Do you have a question about the i2i and is the answer not in the manual?
Questions and answers