Advertisement
STEP 13
Coop's Roost Assembly
13.1 You will need the following pressure-treated material for building the roost for your coop:
3/4 " x 1 1/2 ", 1 1/2 " x 3 1/2 " and 3/4 " x 3/4 ". Ensure you use the illustrations below for the
proper placement of each size of material.
13.2 Fasten the roost to the walls inside the coop with 4x2" wood screws.
13.3 Using 3/4 " x 2 1/4 " and 3/4 " x 3/4 " pressure-treated material and 1/2 " plywood,
build two removable trays according to the illustrations below.
13.4 Fasten the roost's middle beam to the back wall stud with the pressure-treated lumber
with cross section 1 1/2" x 2 1/2" with 2x3" wood screws.
Advertisement
