Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EASY COOPS Manuals
  4. Farm Equipment
  5. 5x6 Chicken Coop Plan
  6. Assembly instructions manual

EASY COOPS Chicken Coop Plan 5x6 Assembly Instructions Manual

Up to 10 chickens
Hide thumbs Also See for Chicken Coop Plan 5x6:

Advertisement

Quick Links

Download this manual
5' x 6' Chicken Coop Plan
Up to 10 chickens

Advertisement

loading

Related Manuals for EASY COOPS Chicken Coop Plan 5x6

Summary of Contents for EASY COOPS Chicken Coop Plan 5x6

  • Page 1 5' x 6' Chicken Coop Plan Up to 10 chickens...
  • Page 2 Compare Free vs. Premium plan Free plan Premium edition Pages Illustrations for Each Step Print Ready Step By Step Instructions Full Materials and Cuttings List Additional Illustrations Additional Blueprints Tools List Fastening Elements List Technical Support TRY PREMIUM...

  • Page 3: Material List

    5'x6' chicken coop material list Walls Exterior Siding Site Preparation Concrete • Pressure-Treated Lumber • Bricks • Wood siding boards • Top Frame Bottom Frame • Pressure-Treated Lumber • Pressure-Treated Lumber Fasteners & Hardware • Plywood Walls Frames • Corner braces •...
  • Page 4 STEP 1 Framing The Floor 1.1 Assemble the frame using 1 1/2” x 5 1/2” pressure-treated material. You will need two boards cut to 6’ that will be the rim joist and two boards cut to 4’9” that will be the joist. 1.2 Provide 4 joists from the pressure-treated lumber with cross-section 1 1/2 x 5 1/2 inch and install them into the frame according to the drawing.
  • Page 5 STEP 2 Assemble Left Side Wall Frame 2.1 Using 1 1/2 “ x 3 1/2 “ and 3 1/2" x 3 1/2" pressure-treated material, construct left wall frame using the drawing below as a reference. 2.2 Connect the beams with 2x4" wood screws. 2.3 Using a speed square or carpenter's square, check the corners to make sure the corners are 90 degrees.
  • Page 6 STEP 3 Assemble Right Side Wall Frame 3.1 Using 1 1/2 “ x 3 1/2 “ and 3 1/2" x 3 1/2" pressure-treated material, construct right wall frame using the drawing below as a reference. 3.2 Connect the beams with 2x4" wood screws. 3.3 Using a speed square or carpenter's square, check the corners to make sure the corners are 90 degrees.
  • Page 7 STEP 4 Assemble Back Wall Frame 4.1 Using 1 1/2 “ x 3 1/2 “ pressure-treated material, construct back wall frame using the drawing below as a reference. 4.2 Connect the beams with 2x4" wood screws. 4.3 Using a speed square or carpenter's square, check the corners to make sure the corners are 90 degrees.
  • Page 8 STEP 5 Assemble Front Wall Frame 5.1 Using 1 1/2 “ x 3 1/2 “ and 3 1/2" x 3 1/2" pressure-treated material, construct right wall frame using the drawing below as a reference. 5.2 Connect the beams with 2x4" and 2x5" wood screws. 5.3 Using a speed square or carpenter's square, check the corners to make sure the corners are 90 degrees.
  • Page 9 STEP 6 Assemble The Roof Frame 6.1 Prepare 12 rafters with cross-section 1 1/2 x 5 1/2 inch. 6.2 Prepare 4 collar ties with cross-section 1 1/2 x 3 1/2 inch. 6.3 Prepare the ridge board with cross-section 3/4" x 7 1/4" inch. 6.4 Connect the beams with 2x3"...
  • Page 10 STEP 7 Install Plywood For The Roof 7.1 Cut sheets of 9/16” plywood for sheathing the roof using the drawing below as a guide. 7.2 Secure the plywood with 2" wood screws.
  • Page 11 STEP 8 Window Installation for Left and Front Walls It is necessary to prepare 2 windows. 8.1 Using 1 1/2 “ x 2 1/2 “ pressure-treated material, cut the outer frame for the window as shown in the drawing below. Additionally, add vertical and horizontal supports using 3/4 “ x 1 1/2 “ material nd cut the recesses for the window hinges .
  • Page 12 STEP 9 Assemble and Install Coop Door 9.1 Assemble the frame from the pressure-treated lumber with cross section 2 1/2 x 1 1/2 " with 2x5" wood screws according to the drawing. 9.2 Install door trims from the pressure-treated lumber with cross section 1 1/2 x 3/4" with 2"...
  • Page 13 STEP 10 Installing Corrugated Roofing 10.1 To cover the roof will need 60 ft of corrugated roof panel. 10.2 Fasten the panels with 1 1/2" sheet metal screw with neoprene washer. 10.3 Prepare and install metal roof ridge caps according to the drawing.
  • Page 14 STEP 11 Nesting Box Assembly 11.1 Use 1 1/2 “ x 3 1/2” and 3/4 “ x 3 1/2 “ pressure-treated material for building the nesting boxes and secure with 4” and 5” wood screws. 11.2 Prepare the 1/2" plywood for horizontal and vertical walls and install them with 2"...
  • Page 15 STEP 12 Coop's Roost Assembly 12.1 Assemble the roost from the pressure-treated lumber with cross section 2 1/2 x 3/4" with 2x2" wood screws according to the drawing. 12.2 Fasten the stairs to the walls inside the coop with 4x2" wood screws. 12.3 Fasten the roost's corner to the rafter with the pressure-treated lumber with cross section 1 1/2 x 1 1/2"...

  • Page 16: Final Touches

    STEP 13 Final Touches Don't forget to choose the desirable paint for your mood and the colors of your yard. Decorate your chicken coop by giving it unique and stylish look.
  • Page 17 Compare Free vs. Premium plan Free plan Premium edition Pages Illustrations for Each Step Print Ready Step By Step Instructions Full Materials and Cuttings List Additional Illustrations Additional Blueprints Tools List Fastening Elements List Technical Support TRY PREMIUM...
  • Page 18 For more great HOW-TO plans please visit: https://easycoops.com/ Copyright The text and illustrations that appear here are the exclusive property of shedplans.org and are protected by federal copyright laws. The duplication, sale or distribution of any portion of these plans without prior written consent from the original designer will be subject to the appropriate penalties for copyright infringement.