Advertisement
STEP 10
Assemble and Install Coop Door
10.1 Assemble the door frame using 2 1/2 " x 1 1/2 " pressure-treated material.
Use the illustration below as a reference.
10.2 Use 1 1/2 " x 3/4 " pressure-treated material for the door trim and secure with 2" wood screws.
10.3 Prepare and install starter courcer from the pressure-treated lumber
with cross section 1/4" x 3/4" (node G on page 27).
10.4 Install the exterior siding of the door using 1/2 " x 6" siding boards in accordance with the
illustration below.
10.5 Assemble siding shields with 2" galvanized nails.
10.6 Install three 3" door hinges using 2x1" wood screws. Finish the door installation
by attaching 4" surface bolt and 6" door pull (see nodes O, P).
O
( 1 : 15 )
O
P
P
( 1 : 15 )
Advertisement
