Advertisement
Chapter 6 - Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor. They
are not user-serviceable.
The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert
anything inside the ventilation slots.
The touchmonitor ships with a 3-wire, grounding power cord. The power cord plug only fits into a
grounded outlet. Do not fit or modify the plug into an outlet that has not been configured for this purpose.
Do not use a damaged power cord. Only use the power cord that came with your ELO touchmonitor. Use
of an unauthorized power cord might invalidate your warranty.
Ensure that your installation is equipped to maintain the specified environmental conditions listed in the
Technical Specifications chapter.
The equipment power supply cord shall be connected to a socket-outlet with earthing
connection.
This unit is supplied by an UL Listed power supply suitable for used at Tma 40 degree C and
operated altitude at minimum 3048 m whose output meets SELV, and is rated 12Vdc, 3.0A
minimum or
Please purchase the approved power source through the specified authorized dealer.
(specifications are as follows)
Care and Handling
The following tips will help keep your touchmonitor functioning at an optimal level:
Disconnect the AC power cable before cleaning.
To clean the display unit cabinet, use a clean cloth lightly dampened with a mild detergent.
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does
get inside, turn the unit off and have a qualified service technician check it before you power it
on again.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean the touchscreen, use window or glass cleaner applied to a clean cloth or sponge.
Never apply the cleaner directly to the touchscreen. Do not use alcohol (methyl, ethyl or
isopropyl), thinner, benzene, or other abrasive cleaners.
Ensure the environmental temperature and humidity are maintained within specification and do
no block ventilation slots.
User Manual – 2201L
SW601363 Rev L, Page 17 of 25
Advertisement
