Table of Contents
Advertisement
(2) After set the WiFi parameters, adjust the switch to WIFI mode, For Y/M series controller,
just remove LAN cable will be ok.
(3) Wait for about 3 minutes, controller will come online. Please watch the "Internet" light,
if it flashing regularly means online success, go to Taxihub platform and check it.
Notes：
If could not scanning the WiFi, please try to turn on/turn off Software or WiFi Switch.
If controller can't get access to internet through WiFi, please double check the steps below:
1)
WiFi antenna plug correctly;
2)
WiFi password is correct or not;
www.sysolution.net
11
Advertisement
Table of Contents
Need help?
Do you have a question about the E2 Series and is the answer not in the manual?