Table of Contents
Advertisement
INSTALLATION
Plug one end of the USB power cord into the power port located on the bottom of the
camera. Plug the other end into the power adapter.
From here, there are two methods the camera can be installed:
• Using the mounting brackets
• Using the round adhesive
Mounting bracket installation method
1. Align the mounting bracket onto a clean stable surface. With a pen or pencil, mark
the location of the two holes of the mounting bracket onto the surface. Remove the
mounting bracket from the surface.
2. Using a drill (not supplied), form holes on the marked locations. Align the mounting
bracket with the drilled holes, then secure the mounting bracket with the provided
screws into the holes.
3. Align and twist the camera onto the grooves of the mounting bracket to secure it into
place.
6
Advertisement
Table of Contents
