Table of Contents
Advertisement
INSTALLATION
Mounting to wall/ceiling (masonry):
1.
Drill pilot holes and insert the supplied wall anchors first.
2.
Place the bracket against the surface, in line with the wall anchors, and secure it in
place with the supplied screws.
3.
Attach the camera to the bracket.
Mounting to wall/ceiling (timber / dry wall):
1.
If not drilling into wall studs, drill pilot holes and insert the supplied wall anchors
first
2.
Place the bracket against the surface, in line with the wall anchors (if used) and
secure it in place with the supplied screws.
3.
Attach the camera to the bracket.
Alternatively, the camera can be placed on a clean, horizontal, flat surface.
5
Advertisement
Table of Contents
