Safety Instructions; Care - tams elektronik ZEUS s88-BiDiB-Link Manual

tams elektronik

1.4. Safety instructions

Note:
!
The interface contains integrated circuits (ICs). These are sensitive to electrostatic charging.
Therefore, do not touch these components until you have "discharged" yourself. For this
purpose, e.g. a grip on a radiator is sufficient.
Improper use and non-observance of the instructions can lead to incalculable hazards. Prevent
these dangers by carrying out the following measures:

Only use the interface in closed, clean and dry rooms. Avoid moisture and splash water in
the environment. After condensation has formed, wait two hours for acclimatisation before
use.

Disconnect the interface from the power supply before carrying out wiring work.

Supply the interface only with extra-low voltage as specified in the technical data. Use only
tested and approved transformers.

Only plug the mains plugs of transformers into properly installed and fused earthed sockets.

When making electrical connections, ensure that the cable cross-section is sufficient.

Heating of the interface during operation is normal and harmless.

Do not expose the interface to high ambient temperatures or direct sunlight. Observe the
information on the maximum operating temperature in the technical data.

Regularly check the operational safety of the interface, e.g. for damage to the connection
cables.

If you notice damage or if malfunctions occur, disconnect the connection to the power
supply immediately. Send the interface in for inspection.

1.5. Care

Do not use any cleaning agents to clean the interface. Only wipe the interface dry. Disconnect
the interface from the power supply before cleaning.
ZEUS | s88-BiDiB-Link
Getting started | 5