ZEUS | s88-BiDiB-Link
tams elektronik
5. Settings
When switching on the BiDiB system all interfaces and nodes are identified automatically by the
interface, and displayed on the screen.
5.1. Identify button
In order to identify an interface ZEUS in the screen display of the control software, you have
to push the identify button on the PCB. Then, the assigned interface is highlighted in the
screen display, and the LED on the ZEUS flashes.
5.2. Firmware update and configuration
By means of the applicactions BiDiB-Wizard and BiDiB-Monitor (both available as free
downloads), you can perform a firmware update for the interface ZEUS. Please check the
description to determine whether a particular program provides these possibilities as well.
Firmware update
The current firmware is available as a free download under:
http://tams-online.de/download/firmware
For starting the update mode, you must keep the identify button pushed while making contact
to the PC (via the USB cable). ZEUS will be logged in as "bootloader" then and you can
perform the update according to the information given by the software. Meanwhile no other
BiDiB nodes are displayed.
When not having integrated ZEUS in a BiDiB-control, you can send in the interface for
updating.
12 | Settings