How To Use The Single-Time Alarm - Seiko H-1 Instructions Manual

How to use the single-time alarm
・The single-time alarm rings only once at the designated time. As it rings, it is
automatically disengaged.
・The alarm can be set within the coming 12 hours from the current time in one-
minute increments.
When the alarm is disengaged, the alarm
hands indicate the current time. When the
alarm is engaged, the hands indicate the
designated alarm time.
<Note on adjusting the alarm hands to the current time>
・ Set the alarm hands to the current time at the same time as you set the main time.
(Refer to "Setting the time and adjusting the stopwatch hand position".)
58
※If the alarm hands are advanced past the time for which you wish to set the alarm,
keep button pressed to advance the hands further. They stop when they indicate
the current time. Release the button, and then, press it again to re-set the desired
alarm time.
※The alarm can be set within the coming 12 hours. If the current time is 10:08
a.m., it can be set for a time up to 10:07 p.m.
③After all the adjustments are completed, push the crown back in
to the normal position.
※If the crown is left at the first click, the alarm will not ring. Be sure to push in the
crown after setting the alarm time.
○To stop the alarm
At the designated alarm time, the alarm rings for 20 seconds and stops.
To stop it manually, press button.
※Once the alarm rings and is stopped, it is automatically disengaged.
60
○How to set the alarm time
①Pull out the crown to
the first click.
※Please note that, when the
crown is pulled out to the first
click, the stopwatch operation
cannot be made.
②Press button to set the
alarm hands to the desired
alarm time.
The alarm hands move quickly if
the button is kept pressed.
○To reset or cancel the set alarm time
・ To reset the alarm time you have set
・ To cancel the alarm time you have set
①Pull out the crown to the first click.
②Press button to set the alarm hands to the desired alarm time.
The hands move quickly if the button is kept pressed.
・ To cancel the alarm time you have set, press button repeatedly to set the alarm
hands to the current time.
More conveniently, keep button pressed to advance the alarm hands quickly. They
stop when they indicate the current time. Then, release the button.
③After resetting or canceling the set alarm time, push the crown
back in to the normal position.
Crown
First click (Alarm time setting)
When the alarm is engaged, the
alarm hands indicate the designated
alarm time.
Button
59
61