Seiko H249 Manual

CHARACTERISTICS:
1. Analogue indication: Two-hand indication (hour and minute).
2. Digital time and calendar: Hour (24 hour indication or 12 hour
indication), "A" (AM) / "P" (PM), minute, second, date and day of
the week. The month is displayed only when the calendar is adjusted.
3. Tri-time function: The home time display and the local time display
in the digital function, and the time display in the analogue
function.
Note:
Both the analogue and digital functions are activated by the same
crystal oscillator. However, as each function of the watch operates
independently, the operation of any function does not affect the
accuracy of any other function.
4. Stopwatch display: Minute, second and 1/10 second up to 30 minutes.
When the measured time exceeds 30 minutes, the display will reset to
"O OO-o" and starts measuring.
5. Alarm display: Hour, minute and "A" (A.M.) / "P" (P.M.) (12 hour
indication). The alarm can be set to ring at any desired hour and
minute.
6. Hourly time signal: The time signal can be set to ring every hour on
the hour.
7. Water Resistant: When "WATER RESISTANT" is shown on the back of your
watch case, the watch is water resistant.
8. Battery life indicator: All the digits in the display start flashing
when the battery life nears its end.
9. Battery: Use a miniature battery, SEIKO (SEIZAIKEN), TR926W, Maxwell
SR926 or U.C.C. 399.
Original Document Provided by Seiko.
OCR & Formatting by Deomandinka.
SEIKO DUO-DISPLAY QUARTZ ALARM CHRONOGRAPH
Button B
Button A
CAL. H249
Crown
/Continued.....